CO2 Laser Marking Machine Marking and Carving on Wood Paper

A CO2 laser marking machine is a versatile tool that can be used for marking, engraving, and cutting various materials, including wood and paper. Here's how it works and what you need to know for marking and carving on these materials:

Marking and Carving on Wood

Applications

• Engraving logos, text, or artwork on wooden surfaces.

• Creating decorative patterns on furniture, cutting boards, or wooden crafts.

• Cutting thin wood sheets for models or inlays.

Settings and Tips

• Power: Adjust the laser power based on the type and thickness of the wood. Lower power for marking, higher power for deep engraving or cutting.

• Speed: Slower speeds result in deeper engravings, while faster speeds are better for surface marking.

• Focus: Ensure the laser is properly focused on the wood surface for optimal results.

• Material: Use untreated or lightly treated wood for best results. Avoid woods with high resin content (e.g., pine) as they can produce uneven burns and residue.

Considerations

• Ventilation: Wood engraving produces smoke and fumes, so proper ventilation or an exhaust system is necessary.

• Charring: To minimize charring, use lower power settings or apply masking tape to the wood surface before engraving.

• 
  

Marking and Carving on Paper

Applications

• Cutting intricate designs for paper crafts, invitations, or stencils.

• Engraving fine details or text on paper for artistic projects.

• Creating perforations or patterns for packaging or decorative purposes.

Settings and Tips

• Power: Use low power settings to avoid burning or scorching the paper.

• Speed: Higher speeds are typically used for paper to prevent excessive heat buildup.

• Focus: Ensure the laser is correctly focused to achieve clean cuts or marks.

• Material: Thicker paper or cardstock works best for engraving and cutting. Avoid glossy or coated papers, as they may produce uneven results or release harmful fumes.

Considerations

• Fire Risk: Paper is highly flammable, so monitor the process closely and avoid leaving the machine unattended.

• Ventilation: Even though paper produces less smoke than wood, proper ventilation is still recommended.